What the Flex Light Pro Includes
The Lume Cube Flex Light Pro is a dual edge-lit LED panel lighting system designed for tattoo artists, beauticians, and creators. It comes with two 270° rotating edge-lit LED panels mounted on flexible gooseneck arms, plus a sturdy base. The system provides soft, diffused light to minimize harsh shadows and glare, which is especially important for fine-line detailing, makeup application, or any precision work.
Setting Up the Flex Light Pro
Follow these steps to get your Flex Light Pro ready for use.
- Unbox and inspect: Remove the Flex Light Pro from the box. Check that both edge-lit panels, the gooseneck arms, and the base are present and undamaged. No additional tools are required.
- Attach the panels to the arms: Each panel mounts onto a flexible gooseneck arm. The arms are pre-attached to the base, so you simply need to secure each panel by screwing it onto the arm's mounting point. Hand-tighten until snug—do not overtighten.
- Position the base: Place the sturdy base on a flat, stable surface. The base is designed to keep the lighting steady during use, so ensure it is on a level area before proceeding.
- Adjust the panels: Each panel rotates 270°, allowing you to direct light exactly where needed. Bend the gooseneck arms to position the panels at the desired height and angle. For tattoo work, position one panel on each side of the work area to eliminate shadows.
- Power on and test: Connect the power supply (included) to the base and plug it into a wall outlet. Turn on each panel using the control on the panel itself. The edge-lit LEDs produce soft, diffused light immediately.
Key Specifications
- Lume Cube Flex Light Pro Dual Edge-Lit LED Panel Lighting System: The Flex Light Pro has a CRI rating of 96+, ensuring true-to-life color accuracy. High CRI is critical for tattoo and beauty work where color precision matters—it ensures that ink colors or makeup shades appear as intended under the light.

Lume Cube Flex Light Pro Dual Edge-Lit LED Panel Lighting System
Tips for Best Results
For tattoo application, position the panels as recommended in the product instructions to reduce glare while keeping the area fully lit. For beauty or makeup work, position the panels slightly above eye level to soften shadows under the chin and eyes. The flexible gooseneck arms let you fine-tune the angle without moving the base.


