Back to Blog
How-to Guides 2026-11-16 Lume Cube, Inc. 0 views

Lume Cube 2.0 App Setup: Pair, Control, and Use It Underwater

Lume Cube 2.0 App Setup: Pair, Control, and Use It Underwater

A practical walkthrough for pairing the Lume Cube 2.0 with the Lume X app, adjusting brightness and flash modes, and using the waterproof cube for underwater lighting.

What the Lume X app actually controls on the 2.0

The Lume Cube 2.0 is a palm-sized, waterproof LED cube that pairs with the Lume X app for wireless control. According to the supplied product information, the app lets you adjust brightness, flash modes, and light settings without touching the light itself. That matters when the cube is mounted to a camera or drone, or when it is placed somewhere awkward to reach.

The supplied information does not list Bluetooth version, pairing steps, or a maximum wireless range. Treat the walkthrough below as a practical framework for app setup and underwater use, and check the app's own instructions for device-specific pairing prompts.

The hardware behind the app

  • Lume Cube 2.0 App Controlled Waterproof LED Light: The Lume Cube 2.0 is a compact, waterproof, ultra-durable LED cube light that fits in the palm of your hand. Its small size and waterproof build are why app control is useful: you can place the cube where your hands cannot easily reach, including wet environments.
    Lume Cube 2.0 App Controlled Waterproof LED Light
    Lume Cube 2.0 App Controlled Waterproof LED Light
  • Lume Cube 2.0 App Controlled Waterproof LED Light: Brightness, flash modes, and light settings can be controlled wirelessly through the Lume X app. These are the controls you will look for after pairing, so you know what the app is meant to change.

A practical app setup sequence

  1. 1. Install the Lume X app: Download the Lume X app to the phone or tablet you will use on set. The supplied information names the app but does not list supported operating systems, so confirm compatibility in the app store listing before you rely on it.
  2. 2. Power on the Lume Cube 2.0: Turn on the cube before opening the app. The supplied information does not describe the power button sequence, so use the controls on the unit as marked.
  3. 3. Open the app and look for the light: Launch the Lume X app and follow its on-screen pairing or connection prompt. The supplied information does not confirm a specific pairing button or menu name, so let the app guide you rather than guessing at steps.
  4. 4. Confirm control before you mount the cube: Once connected, test brightness and flash mode changes while the cube is still in your hand. That way you know the app is talking to the light before you place it on a camera, drone, or underwater housing.

Adjusting brightness and flash modes from the app

After pairing, the app is where you make brightness and flash-mode changes. The supplied information confirms those controls but does not give exact brightness levels, flash duration, or a step-by-step menu map. Use the app's sliders and mode buttons as they appear, and judge exposure on your camera or monitor rather than assuming a numbered setting means a specific output.

For solo shooters, the practical advantage is that you can fine-tune the light without walking back to the cube. If you are shooting stills with flash, set the mode before you frame the shot; if you are shooting video, adjust brightness between takes so the change does not appear on camera.

Underwater lighting setup with the waterproof cube

The Lume Cube 2.0 is described as waterproof and built for underwater scenes as well as mountain tops. That makes it a candidate for wet environments where a non-waterproof light would be a risk. The supplied information does not state a depth rating, a maximum submersion time, or a required housing, so do not assume the cube is rated for any specific depth or duration beyond what the product documentation states.

A sensible underwater workflow is to pair and test the light on land first, confirm the app responds, then place the cube in the water. Keep your phone or tablet dry and within the working range you have already tested. If the app loses connection once the cube is submerged, bring the cube back up rather than repeatedly pressing controls you cannot see.

Checkpoints before you rely on app control

  • Test the connection where you will shoot: Pair the cube in the same general area as your shoot. The supplied information does not confirm wireless range, so treat distance as something to verify rather than assume.
  • Set brightness and flash mode before mounting: Make your app adjustments while the cube is accessible. Once it is on a drone or in the water, reaching the controls may not be practical.
  • Keep a manual fallback in mind: The supplied information does not confirm whether every app function is also available on the cube itself. If the app disconnects, you may need to retrieve the light to change settings.

What the supplied information does not settle

Several details that would make a setup guide more precise are not confirmed here: Bluetooth version, pairing steps, app menu names, wireless range, battery life, charging method, depth rating, and whether the cube can be controlled manually when the app is unavailable. None of that means the product lacks those features; it means the supplied record does not document them. For those specifics, check the Lume Cube 2.0 product page or the Lume X app's own help screens before your shoot.

Related Articles

Customer Service
Home
Products
Cart
Profile